Laboratory Mills
5" x 11"
Laboratory Mill
Standard Features
- Removable bronze side shields
- Washup stick
- Completely enclosed unit
- Steel weldment frame
- Manually operated take-off knife
- Variable speed motor mounted inside frame
- Positive roll temperature control
- Full complement of safety equipment
- Centralized lubrication
- Roller chain drive
- Choice of hand-or knee operated safety switch
- Electrical system to meet individual requirements
Optional Features
- Optional fast apron roll speed of 250 rpm
- Decorator colors
- Explosion-proof electrical equipment
- Variable frequency drive
Roll Size | Model | Controls | HP | Apron Roll Speed | Floor Space | Net lbs. | Shipping lbs. |
---|---|---|---|---|---|---|---|
5 x 11 | 655-V | Sight-O-Matic | 2 | 180 | 34" x 34" | 935 | 985 |
5 x 11 | 5-B | Manual | 2 | 180 | 34" x 34" | 935 | 985 |
4 x 8 | 6-B | Manual | 1 | 180 | 31" x 31" | 800 | 850 |
Model 8A Bench Top Mill
Model 8A Bench Top Mill
- 2 ½" x 5" stainless steel, water cooled rolls
- All-aluminum frame
- Variable speed with braking
- Teflon side shields
- ¾ HP, DC motor
- 115 volt operation
- Overall size: 28" long x 17 ¾" wide x 11 ½' high
- Weight: approximately 180lbs.
Options
- Explosion-proof electricals
- Ceramic coated rolls
Electric Heated 3" x 8" Two Roll Mill
Electric Heated Laboratory Mills
Lehmann Mills now offers electrically heated lab mills. Recently designed and manufactured, as shown in the picture, is a 3" x 8" Electric Heated Two Roll Lab Mill.
Standard Features
- A fabricated, welded steel base, providing high strength and wear resistance.
- Available with a portable base, with wide wheel industrial caster and screw down locking pads.
- Graphalloy bushings requiring no lubrication which are rated for journal temperatures up to 750 deg. F.
- Hardened alloy steel rolls with .008" to .010" thick chrome plating designed for 750 deg. F. maximum surface temperatures.
- Dial indicators on roll adjustment screws provide control over the nip opening and facilitates resetting of the roll gaps.
- Vertically adjustable guides to compensate for wear on the rolls or guides.
- Cartridge heating elements in each roll controlled by individual pyromatic solid state controllers at a 700 deg. F. maximum obtainable temperature.
- Roll speeds individually variable from 0 to 45 RPM, or to customers specifications with a speed control and tachometer mounted in a control panel.
- The drive is provided by two 1 ½ H.P. motors, and A.C. variable frequency motor controllers.
- Included are knee operated safety stop switches on front and back of the mill. An overhead chain safety arrangement is also available.
- Scraper knife assemblies are provided for the fixed and adjustable rolls.
- The approximate dimensions of this mill are 60" wide x 30" deep x 44 " from floor to center line of rolls.